| ||||||||||
![]() NEW STUFF! Custom Builds and Projects Upcoming Events Electric Helis Nitro Helis Heli Parts Electric Planes Nitro Planes Airplane Parts Electric Cars and Trucks Nitro Cars and Trucks Boats Airsoft ![]() Browse By |
Now In: Cars → Electric Cars → Arrma ARAC2021 Raider Baja Buggy Green RTR 2.4GHz
This is the electric powered, 2.4GHz radio controlled 1/10 scale, ready to run
Raider Baja Buggy with Green Body from Arrma.
FEATURES: Chassis: Aluminum 0.08" (2mm) thick matural finish with double
chassis rails and alloy front chassis plate, batteries fit under
chassis-no need to remove body to change batteries
Drive: Rear wheel with steel driveshafts and axles
Motor: 15 turn brushed
Radio: ATX300 2.4GHz 3-channel with lightweight ARX300 receiver,
transmitter can be converted for left or right hand use, seven
position adjustable steering wheel, six model memory, digital trim,
servo reverse, end-point adjustment and failsafe
Electronic Speed Control: Waterproof MEGA ESC with LiPo cutoff
Receiver Box: Splash and dust proof
Body: Trimmed and painted "Warp" polycarbonate Baja buggy with black
plastic rear wing
Transmission: Metal gear, brushless ready
Slipper Clutch: Machined alloy gears, adjustable for different track
conditions
Differential: Metal planetary gear, oil filled
Suspension: Fully independent
Shocks: Composite body, oil-filled
Tires: dBoots Dunerunner with dBoots foam inserts
Front, 1.2" (30mm) wide, 3.3" (85mm) diameter
Rear, 1.6" (40.5mm) wide, 3.3" (85mm) diameter
Wheels: Six spoke chrome, 12mm hex
Front, 1.1" (29mm) wide, 2.2" (56mm) diameter
Rear, 1.6" (41mm) wide, 2.2" (56mm) diameter
Caster: Adjustable caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bellcrank type with composite servo saver
Warranty: Two year
INCLUDES: RTR Raider Baja Buggy with Green Body and 2.4GHz Radio, ESC,
Steering Servo, 15T Motor, Tires, Wheels, Foam Inserts, Decals and
Instruction Manual
REQUIRES: AA Batteries: Four for transmitter
Battery: 7.2V 6-cell stick NiMH or NiCd, or 7.4volt 2S LiPo
(if using LiPo batteries, LiPo mode must be set on ESC)
Battery Charger: To match selected battery
Building and track equipment
SPECS: Vehicle-
Length: 15.7" (400mm)
Width: 9.9" (252mm)
Height: 5.5" (140mm)
Wheelbase: 11.4" (290mm)
Ride Height: 1.2" (30mm)
Weight: 3lbs (1360g) without battery
Body-
Length: 10.1" (257mm)
Width: 4.5" (114mm) at widest point
Height: 3" (76.2mm)
|
||||||||||||||
|
You have 0 item(s) in your Shopping Cart Home | Contact Us | Return Policy | Privacy Policy | Site Map | Copyright 2009-2011. All Rights Reserved.Cyclone Hobbies is division of Sound Ideas, Inc
|