Un-Cure CA Debonder 1oz (BSI161)
The surface properties of some materials, such as
being acidic or having very low moisture content, slow down the curing of
cyanoacrylates. CA accelerator is formulated to harden CA in ten seconds or
less. Accelerator allows large gaps to be filled in loose fitting joints and
cures the excess CA that sometimes oozes out of joints so that objects can be
handled within seconds without the worry of sticking one’s fingers to the parts.
Accelerator makes the repair of household items much easier.
UN-CURE debonder will soften cured CA. If parts are bonded incorrectly or your
fingers are stuck together, a few drops of UN-CURE will dissolve the CA in about
a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone
to clean off softened CA, then wash off with soap and water.
Model: | BSI161 |
Manufacturer: | BSI |